1 EasyMax Voice Self-Monitoring Blood Glucose System Quick Reference Guide
10 2. Put a test strip into the meter in the direction of the arrow. The meter turns on automatically. The icons and show themselves. 3. When t
11 5. Gently squeeze and/or massage your fingertip until a round drop of blood on your fingertip. 6. Touch the blood drop at the tip of the t
12 1. Massage the puncture area of forearm for a few seconds. 2. Press and hold the device with clear adjustable tip against the forearm. 3. Press the
13 Discarding Used Lancets 2. Please discard used disposable lancets according to the recommendations of your healthcare professional. 1. Uns
14 Viewing & Deleting Test Results The meter provides 7, 14, 30, 60 and 90 days averaging to help track your blood glucose trend soundlessly.
15 Screen Messages And Troubleshooting Never make treatment decisions based on an error message. If you have any concerns, please contact your local d
16 The ”Ht” and thermometer icon appears.Temperature is too high, outside the required range of 10°C - 40°C (50°F - 104°F). This alerts u
17 Manufacturer: EPS Bio Technology Corp. 2F, No.49-2, Lane 2, Guang-Fu Rd., Sec. 2, Hsinchu City, Taiwan Tel: 886-3-5752522 Fax: 886-3-5752552 E-ma
2 Installing Batteries 1. Open the battery door on the back of the meter by pushing the tab in the direction of the arrow and pulling t
3 Setting The Time and Date—First Time Use Setting the current time and date in your meter is important if you intend to use the meter memory. 1
4 Setting The Language and Volume—First Time Use 1. Press to adjust the language.(En= English, Es = Spanish) 2. And press to confirm the s
5 Running A Control Solution Test You need the meter, a test strip, and control solution. 1. Put a test strip into the meter in the direct
6 6. Touch the drop at the tip of the test strip. 7. The meter starts to count down from 5 seconds and then shows the result. 8. Do not r
7 Inserting A Lancet Into The Lancing Device You must first load the lancet into the lancing device to get it ready for use. 1. Unscrew the
8 3. Recap the front cap.4. Select the desired penetration depth. Select 1-2 for soft or thin skin. 3 for average. 4-5 for thick or callouse
9 5. Pull on the sliding barrel of the lancing device until it clicks and then release. Now the lancing device is ready. Do not pri
Commentaires sur ces manuels